Top Bearings is a professional China PVDF Ptfe Sleeve Anti Corrosion Plastic Ball Bearings manufacturers and suppliers, if you are looking for the best PVDF Ptfe Sleeve Anti Corrosion Plastic Ball Bearings with low price, consult us now!
Top Bearings is a professional China PVDF Ptfe Sleeve Anti Corrosion Plastic Ball Bearings manufacturers and suppliers, if you are looking for the best PVDF Ptfe Sleeve Anti Corrosion Plastic Ball Bearings with low price, consult us now!
As the typical type of fluoroplastic, PTFE and PVDF have the most excellent anti-corrosion performance, Among them PTFE has the best anti-corrosion performance of all the engineering-plastics known to man, PVDF/PTFE Anti-corrosion Plastic Bearings could be used in all the Strong Acid and Alkali application, including HF and smoke formation H2SO4 HNO3 or HCL (98% above) etc., and PVDF/PTFE Anti-corrosion Plastic Bearings could be used in high temperature application. PTFE could be used in 180℃ and PVDF in 150℃. But PTFE has very low mechanical strength, easy to be out of shape and have large Dimension change when the temperature rise or reduce.
The Density of PVDF plastic bearings is 1.77 g/cm3, PTFE plastic bearings is 2.18 g/cm3, Sliding friction coefficient is 0.30 and 0.10, Short-time highest application temperature is 150℃ and 260℃.
So PVDF/PTFE Anti-corrosion Plastic Bearings couldn't be used in heavy load and high-speed occasion. Compared with PTFE, PVDF has better comprehensive performance. Generally the rings and cage were made with PTFE or PVDF, Balls were made with glass, ceramic or stainless.
Material: |
PVDF / PTFE |
Basic Properties: |
Anti-corrosion |
Density: |
PVDF Is 1.77g/cm3, PTFE Is 2.18g/cm3 |
The Most Highest Temperature: |
PTFE Is 180℃, PVDF Is 150℃ |
The Material Of The Rings & Cage: |
PVDF Or PTFE Material |
The Material Of Balls: |
Glass, Ceramic Or Stainless |
High Light: |
rod end bearing, plain bearing bush |
Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK |
Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 |
Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 |
Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | |
Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 |
Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | 0.08-0.1 | 0.3-0.38 | |
Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 |
Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 |
Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 |
Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | 2.1 | 3.2-3.3 | |
Volume resisrivity (Ω·cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 |
flammability UL94 | + | + | - | (+) | (+) | - | + | + |
Anti-weathering | - | - | - | - | - | - | + | - |
Note: + =resistant; (+) =partly resistant; - =non-resistant |
Chemical Composition | Material | ||||||||
PI | PEEK | PTFE | PVDF | PA66 | POM | PP | HDPE | ABS | |
Acrtate | + | + | + | (+) | (+) | + | + | (+) | + |
Formic acid (10% water) | + | + | + | + | - | - | + | + | + |
Ammonia (10% water) | - | + | + | + | + | (+) | + | + | + |
Aether | + | + | + | + | + | + | + | ||
Petrol | + | + | + | + | + | + | (+) | (+) | (+) |
Bori acid (10% water) | + | + | (+) | + | + | + | + | + | |
Aminoform | + | + | + | - | - | (+) | - | - | |
Aeti aid 100% | (+) | - | + | - | - | + | + | - | |
Aceti aid (10% water) | + | + | + | - | (+) | + | + | + | |
HF | + | - | - | + | + | (+) | |||
Formaldehyde aqu (30% water) | + | + | + | + | - | + | + | + | |
Glycerin | + | + | + | + | + | + | + | ||
Iodine, Glycol | + | + | (+) | - | (+) | + | + | (+) | |
K2Cr2O7 (10% water) | + | + | + | - | + | + | + | ||
KMnO4 (1% water) | + | + | + | + | - | (+) | + | + | (+) |
2-Hydronyprpionic 10% | + | + | + | - | - | + | + | - | |
2-Hydronyprpionic 90% | + | + | + | + | + | (+) | + | + | + |
Nad (10% water) | + | + | + | + | + | + | + | + | + |
NaNO3 (10% water) | + | + | + | + | + | + | + | + | |
NaOH (50% water) | + | + | + | + | - | + | + | + | |
NaOH (5% water) | + | + | + | - | + | + | |||
Oxalic (10% water) | + | + | + | + | (+) | (+) | + | + | + |
Tetracarp | + | + | + | (+) | + | - | - | (+) | |
H3PO3 100% | + | + | - | + | + | ||||
H3PO4 (10% water) | + | + | + | - | - | + | + | ||
NHO3 (2% water) | + | + | + | + | - | - | + | + | + |
HCL (2% water) | + | + | + | (+) | - | - | + | + | + |
H2SO4 98% | - | + | - | - | + | (+) | - | ||
Soap liquid | + | + | + | + | + | + | |||
Alkaliliquid (10% water) | + | + | + | + | + | + | + | ||
Toluene | + | + | + | + | + | + | + | (+) | - |
Water, cold | + | + | + | + | + | + | + | + | + |
Water, hot | + | + | + | (+) | - | + | + | + | |
H2O2 (30% water) | (+) | + | + | - | - | + | + | + | |
H2O2 (0.5% water) | + | + | + | - | (+) | + | + | + | |
Asphalt | + | + | (+) | + | (+) | (+) | |||
Note: + =resistant; (+) =partly resistant; - =non-resistant |