Top Bearings is a professional China ZrO2 Ceramic Plain Bearings Ball Anti Canker manufacturers and suppliers, if you are looking for the best ZrO2 Ceramic Plain Bearings Ball Anti Canker with low price, consult us now!
Top Bearings is a professional China ZrO2 Ceramic Plain Bearings Ball Anti Canker manufacturers and suppliers, if you are looking for the best ZrO2 Ceramic Plain Bearings Ball Anti Canker with low price, consult us now!
Material: |
ZrO2 Ceramic |
Density: |
6.0 G/cm3 |
Grad: |
G5-G200 |
HV Hardness: |
1300 HRC |
Coefficient Of Expansion: |
10.5 10^-6/℃ |
The Highest Temperature: |
800℃ |
High Light: |
full ceramic bearings , ceramic ball bearings |
ZrO2 Ceramic Ball at routine temperature has high intension and tenacity, good wearing resistance, high temperature resistance, anti-canker, high rigidity, no magnetism, isolation for electricity. At 600℃, the intension and rigidity almost could not be changed, whose density is 6.00g/cm3, ZrO2 Ceramic Ball’s thermal expansion rate is close to metal expansion rate, and could be used in the joint with metal.
ZrO2 Ceramic Ball at routine temperature has high intension and tenacity, good wearing resistance, high temperature resistance, anti-canker, high rigidity, no magnetism, isolation for electricity. At 600℃, the intension and rigidity almost could not be changed, whose density is 6.00g/cm3, ZrO2 Ceramic Ball’s thermal expansion rate is close to metal expansion rate, and could be used in the joint wi
Staple Material and Manufacturing Presision |
||||
Ceramic Balls |
Plastic balls |
Glass Balls |
Stainless Balls |
|
meterial |
ZrO2,Si3N4,SiC,Al2O3 |
POM,PE,PP,PA,UPE,PEEK |
GLASS |
440C,304,316,316L |
grad |
G5-G200 |
G100-G1000 |
G100-G1000 |
G10-G200 |
Staple size of the balls |
|||
Size(inch) |
Size(mm) |
Size(inch) |
Size(mm) |
1.5 |
1/16" |
1.588 |
|
2 |
3/32 |
2.381 |
|
1/8" |
3.175 |
5/32" |
3.969 |
3/16" |
4.763 |
7/32" |
5.556 |
1/4" |
6.35 |
17/64" |
6.747 |
7 |
9/32" |
7.144 |
|
5/16" |
7.938 |
11/32" |
8.731 |
3/8" |
9.525 |
13/32" |
10.319 |
7/16" |
11.112 |
29/64" |
11.509 |
15/32" |
11.906 |
12 |
|
31/64" |
12.303 |
1/2" |
12.7 |
17/32" |
13.494 |
14 |
|
9/16" |
14.288 |
19/32" |
15.081 |
5/8" |
15.875 |
21/32" |
16.669 |
11/16" |
17.463 |
23/32" |
18.256 |
3/4" |
19.05 |
25/32" |
19.844 |
20 |
13/16" |
20.638 |
|
7/8" |
22.225 |
15/16" |
23.812 |
1" |
25.4 |
1-1/16" |
26.988 |
1-1/8" |
28.575 |
1-3/16" |
30.163 |
1-1/4" |
31.75 |
1-3/8" |
34.925 |
35 |
1-1/2" |
38.1 |
|
1-5/8" |
41.275 |
1-11/16" |
42.863 |
1-7/8" |
47.625 |
2" |
50.8 |
Tolerance and surface roughness of the balls |
|||
Grade |
Variation of ball diameter |
Deviation from (△Sph) |
Surface roughness spherical from(Ra) |
not over μ m |
|||
3 |
0.08 |
0.08 |
0.012 |
5 |
0.13 |
0.13 |
0.02 |
10 |
0.25 |
0.25 |
0.025 |
16 |
0.4 |
0.4 |
0.032 |
20 |
0.5 |
0.5 |
0.04 |
28 |
0.7 |
0.7 |
0.05 |
40 |
1 |
1 |
0.08 |
60 |
1.5 |
1.5 |
0.1 |
100 |
2.5 |
2.5 |
0.125 |
200 |
5 |
5 |
0.2 |